Raptor G4 E720 Kit Only model helicopter

Electric Flybar or Flybarless Version

With an all new innovation design that leaps far ahead of all competitions- the bold new 90-size Raptor G4 series from Thunder Tiger, a name you have known and replied upon for quality and high performance helicopters for decades, is going to unleash your imagation. The brand new G4 is designed from a clean sheet for maximum innovative configuration, can be nitro engine or electric powered, flybared or flybarless rotor system, which can be fulfil expectations for the most demanding and ambitious 3D and F3C pilots.
The superbly engineered, precision made all-metal rotor and control system yields silky handling. Ultra high performance, smooth, fast and agile, the G4 is capable of winning F3C contests or 3D competition. The Raptor G4 will make your flying dream’s come true.

Features
Easy & fast conversion between flybared or flybarless rotor system Hardened 15mm steel main shaft Adjustable Bell-Hiller mixing ratio can be set for F3C or 3D (Raptor 90G4 & Raptor E720)
Aerodynamic carbon paddle (Raptor 90G4 & Raptor E720) Collective pitch range +/-15 degrees (Raptor 90G4 & Raptor E720) High-quality, colour shifting preprinted FRP canopy Lightweight and rugged landing skid for low center of gravity Rigid 2mm carbon main frame Lightweight, high- quality screws hardware All metal servo horns & control arms assembly eliminate the need for upgrades Lightweight and vented,high-duty 17mm helical main gear Innovative Quick-calibration system An easy conversion between nitro and electric powering Heavy-duty helical bevel tail gears
Lightweight, one-piece machined metal tail case All metal, high–precision & heavy-duty tail rotor system Efficient torque tube drive system for crisp rudder response and 100% power transfer Easy-install rudder rod guide Lightweight one-piece metal tail boom bracket 3D carbon vertical fin and carbon tail boom support Optional carbon horizontal fin available (Option parts)

 

Specification
Full Length of Fuselage(mm / in.) 1.367mm (53.8″)
Full Width of Fuselage(mm / in.) 221mm(8.7″)
Total Height(mm / in.) 462mm (1.82″)
Main Rotor Dia(mm / in.) 690~720mm/(27.2~28.3″)/1.584~1.644mm(62.4~64.7″)
Tail Rotor Dia(mm / in.) 105mm(4.1″)/280mm(11.0″)as standard Gear Ratio 1:9.25:4.67 (standard)
Full Equipped Weight(g/ lbs.) 3.750-gram(8.27Ibs)
Needed to Complete (Not Included)
Transmitter Minimum 6 Channel,Gyro, Receiver,Esc,Battery, Brushless Motor, 690mm or 710mm Carbon Blades. Servo’s